The Petroleum oil tanker truck 5454 Aluminum sheet produced by Henan Chalco Aluminum is skilled in craftsmanship and can adapt to harsh corrosive environments. It is a typical anti-rust aluminum with high strength and product quality far exceeding national standards....
1 The Introduction of Petroleum oil tanker truck 5454 Aluminum sheet
The Petroleum oil tanker truck 5454 Aluminum sheet produced by Henan Chalco Aluminum is skilled in craftsmanship and can adapt to harsh corrosive environments. It is a typical anti-rust aluminum with high strength and product quality far exceeding national standards. The Petroleum oil tanker truck 5454 Aluminum sheet is widely used in aluminum tanker body/Cylinder etc fields, and has a good reputation; because of its strong corrosion resistance, it is especially suitable for aluminum-magnesium alloy tanker used under high temperature conditions.
2 The Product specification of Petroleum oil tanker truck 5454 Aluminum sheet
* Alloy: 5454
* Material temper: O, H111, H112, H114, H116, H32, etc;
* Thickness (mm): 4-8mm, the normal thickness are generally: 5, 6, 7, 8mm;
* Width (mm): 1500mm-3450mm
The typical width of tanker body/Cylinder and Bulkhead/Wash Board: 1500/1600/1800/2000/2200/2400mm
* Length (mm): 500-16000mm
Typical length: 5500/5750/6000/7500/7850/8600/11800mm
* Production standards: GB/T 3880, EN14286, EN485, ASTM B209, or according to customer's special requirements
* Applicable fields:Oil Tanker cylinder, fuel tank, pressure vessel, marine facility pipeline, automobile wheel, etc.
* Appearance Parameter
|
Type |
Standard Plate |
High Class Plate |
Bright Plate |
Mirror Plate |
|
Roughness Ra/μm |
0.5-0.8
|
0.3-0.5 |
0.1-0.3
|
≤0.04
|
|
Product Description |
Smooth Surface Defect deepness ＜Minus Tolerances of Thickness |
Fine and Smooth surface No or only very little colour aberration and chatters |
Bright,fine and smooth surface No colour aberration and chatters |
Mirror reflective surface Reflecance ≥86% |
|
Applicable Standards |
GB/T 3880 |
EN14286/ASTM B209 EN485 Or depend on Customer’s special requirements |
EN14286/ASTM B209 Or depend on Customer’s special requirements |
EN14286/ASTM B209 Or depend on Customer’s special requirements |
|
Application |
Use directly or after brashing Cylinder, Head, Bulkhead, Wash Board |
Directly Use
Cylinder, Head, Bulkhead, Wash Board |
Directly Use
Cylinder, Head,
|
Directly Use
Cylinder, Head,
|
3 The Chemical composition and Mechanical properties of Petroleum oil tanker truck 5454 Aluminum sheet
1) The Chemical composition of Petroleum oil tanker truck 5454 Aluminum sheet
|
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ni |
Zn |
Ti |
Zr |
Other |
AL |
|
|
single |
total |
||||||||||||
|
5454 |
0.25 |
0.40 |
0.10 |
0.50 -1.0 |
2.4 -3.0 |
0.05 -0.20 |
- |
0.25 |
0.20 |
- |
0.05 |
0.15 |
Remainder |
2)The Mechanical properties of Petroleum oil tanker truck 5454 Aluminum sheet
|
Alloy |
Temper |
Thickness (mm) |
Mechanical properties |
|||
|
Tensile Strength（Mpa） |
Yield strength （Mpa） |
Elongation (%) |
Minimum Bending Radius of 180 Degree |
|||
|
standard value |
standard value |
A50 |
|
|||
|
Not less than |
||||||
|
5454
|
O/H111 |
4-8mm |
215-285 |
≥85 |
≥19 |
1t |
|
5454 |
H32 |
4-8mm |
250-305 |
≥180 |
≥12 |
--- |
4 The Product features of Petroleum oil tanker truck 5454 Aluminum sheet
1) The Petroleum oil tanker truck 5454 Aluminum sheet is a typical anti-rust aluminum with high strength;
2) The Petroleum oil tanker truck 5454 Aluminum sheet has good plasticity and good forming processability;
3) The Petroleum oil tanker truck 5454 Aluminum sheet has strong corrosion resistance and is especially suitable for aluminum-magnesium alloy tanker used under high temperature conditions.
4) The recycling value of Petroleum oil tanker truck 5454 Aluminum sheet is high, which is more economical and environmentally friendly.
5 The Application of Petroleum oil tanker truck 5454 Aluminum sheet
Petroleum oil tanker truck 5454 Aluminum sheet is used to manufacture aluminum Oil Tanker cylinder, fuel tanks, pressure vessels, etc.
