5052 H114 aluminum tread plate for tanker truck can be divided into many types according to the pattern style. The common ones on the market are five-bar, diamond, small three-bar and small five-bar aluminum tread plate....
Introduction of 5052 H114 aluminum tread plate for tanker truck
5052 aluminum tread plate is a common aluminum plate of aluminum-magnesium alloy, which has good corrosion resistance, hardness and rust resistance. It can usually be applied to places with load-bearing capacity, and can also be used as a climbing floor for oil tankers and semi-trailers, tool boxes, etc. 5052 aluminum tread plate can be divided into many types according to the pattern style. The common ones on the market are five-bar, diamond, small three-bar and small five-bar aluminum tread plate.
|
Alloy |
Chemical Component (%) |
||||||||||||
|
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ni |
Ti |
others |
Al |
|
||
|
single |
total |
||||||||||||
|
5052 |
0.25 |
0.40 |
0.10 |
0.10 |
2.2- 2.8 |
0.15-0.35 |
0.10 |
-- |
-- |
0.05 |
0.15 |
Remainder |
|
Chemical component and mechanical properties of 5052 aluminum tread plate for tanker truck
|
Alloy |
Temper |
Mechanical properties |
|||
|
Tensile Strength（Mpa） |
Yield strength （Mpa） |
Elongation (%) |
Bending coefficient |
||
|
standard value |
standard value |
A50 |
|
||
|
Not less than |
|||||
|
5052 |
O |
≤150 |
-- |
14 |
3 |
|
H114
|
180 |
-- |
3 |
3 |
|
Advantages of 5052 H114 aluminum tread plate for tanker truck
- Has good corrosion resistance, hardness and rust resistance.
- With good anti-skid effect, the price is cheaper.
- Excellent welding and processing properties.
Types of 5052 H114 aluminum tread plate
- Five-bar aluminum alloy tread plate: The five-bar anti-skid aluminum plate has become a willow-shaped tread plate and an aluminum alloy tread plate. It has good anti-skid ability, and is widely used in building (floor) platform design and so on. Since the patterns on the surface of the aluminum plate are arranged in relative parallel according to five concave-convex patterns, and each pattern has an angle of 60-80 degrees with other patterns, this pattern has anti-skid performance. This kind of aluminum plate is usually used in China as anti-skid, which has good anti-skid effect and cheap price.
- Compass aluminum alloy tread plate: anti-slip aluminum plate, which has the same effect as five bar, but is not often used.
- Orange peel aluminum alloy tread plate: classic orange peel aluminum tread plate, variant orange peel aluminum tread plate (also known as insect pattern). Its surface presents a pattern similar to orange peel, so it can also be called orange peel aluminum tread plate. It is a series of tread plate commonly used in refrigerators, air conditioners and packaging.
