Both the 5052 aluminum plate and the 5083 aluminum plate belong to the 5-series aluminum-magnesium alloy, but the magnesium content of the two is still quite different from each other, and other chemical components are also slightly different...
Both the 5052 aluminum plate and the 5083 aluminum plate belong to the 5-series aluminum-magnesium alloy, but the magnesium content of the two is still quite different from each other, and other chemical components are also slightly different. The difference in chemical composition makes the development of mechanical system performance different between the two. Whether it is tensile strength or no yield strength, 5083 aluminum plate is much stronger than 5052 aluminum plate. Different chemical compositions lead to different mechanical equipment properties, and different mechanical product properties also lead to different uses of the relationship between the two.
Chemical composition and mechanical properties of 5052 aluminum plate for fuel tank
|
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ni |
Zn |
Ti |
Other |
AL |
|
|
single |
total |
|||||||||||
|
5052 |
0.25 |
0.40 |
0.10 |
0.10 |
2.2 -2.8 |
0.15 -0.35 |
- |
0.10 |
- |
0.05 |
0.15 |
Remainder |
|
Alloy |
Temper |
Thickness (mm) |
Mechanical properties |
|||
|
Tensile Strength（Mpa） |
Yield strength （Mpa） |
Elongation (%) |
Minimum Bending Radius of 180 Degree |
|||
|
standard value |
standard value |
A50 |
|
|||
|
Not less than |
||||||
|
5052 |
O/H111 |
4-8mm |
170-215 |
≥65 |
≥18 |
--- |
|
5052 |
H32 |
4-8mm |
210-260 |
≥130 |
≥10 |
--- |
Chemical composition and mechanical properties of 5083 aluminum plate for fuel tank
|
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ni |
Zn |
Ti |
Zr |
Other |
AL |
|
|
single |
total |
||||||||||||
|
5083 |
0.40 |
0.40 |
0.10 |
0.40 -1.0 |
4.0 -4.9 |
0.05 -0.25 |
- |
0.25 |
0.15 |
- |
0.05 |
0.15 |
Remainder |
|
Alloy |
Temper |
Thickness (mm) |
Mechanical properties |
|||
|
Tensile Strength（Mpa） |
Yield strength （Mpa） |
Elongation (%) |
Minimum Bending Radius of 180 Degree |
|||
|
standard value |
standard value |
A50 |
|
|||
|
Not less than |
||||||
|
5083
|
O/H111 |
4-8mm |
290-370 |
≥145 |
≥17 |
1.5t |
|
5083
|
H32 |
4-8mm |
305-385 |
≥215 |
≥12 |
--- |
Application of 5052 and 5083 aluminum plate for fuel tank
Fuel tank 5052 Aluminum sheet is mainly used to manufacture fuel tank for tank trucks, and also can be used to manufacture molds, silos, etc.
The Petroleum oil tanker truck 5083 Aluminum sheet is used to manufacture liquid tanker such as Petroleum oil tanker, as well as semi-trailer, tanker tank, LNG storage tank, heavy truck gas tank, tank body, etc.
