Introduction of 5182-H111 wide aluminum sheet for fuel tanker5182 aluminum sheet belongs to Al-Mg series alloy, which has good corrosion resistance, excellent weldability, good cold workability, and medium strength. It is widely used in automotive lightweight aluminum. Molded, high strength. It is more than 4 tons lighter than similar carbon steel tankers...
Introduction of 5182-H111 wide aluminum sheet for fuel tanker
5182 aluminum sheet belongs to Al-Mg series alloy, which has good corrosion resistance, excellent weldability, good cold workability, and medium strength. It is widely used in automotive lightweight aluminum. Molded, high strength. It is more than 4 tons lighter than similar carbon steel tankers, and has 20% more capacity than carbon steel tankers. Since the aluminum alloy tank body is lighter than the carbon steel tank truck, the fuel consumption and tire wear during transportation are reduced, thereby reducing the daily operation and maintenance costs.
The welding performance of 5182 aluminum sheet by gas welding, argon arc welding, spot welding and seam welding is very good. Machinability is good. The surface is beautiful after anodizing. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, can not be strengthened by heat treatment, good plasticity in semi-cold work hardening, low plasticity in cold work hardening, good corrosion resistance, good weldability, Poor machinability, can be polished. Mainly used for low-load parts that require high plasticity and good weldability and work in liquid or gas medium.
Specifications of 5182-H111 wide aluminum sheet for fuel tanker
Alloy：5182 Aluminum sheet
Temper：F.O,
H12,H14,H16,H18,H19,H22,H24,H26,H28,H32,H34,H36,H38,H111,H112,H114,H116,H321
Thickness（mm）：0.15-600
Width（mm）：20-2650
Length（mm）：500-16000
Chemical composition of 5182-H111 wide aluminum sheet for fuel tanker
1) The chemical composition of 5182-H111 wide aluminum sheet for fuel tanker
|
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ni |
Zn |
Ti |
Zr |
Other |
AL |
|
|
single |
total |
||||||||||||
|
5182 |
0.20 |
0.35 |
0.15 |
0.20 -0.50 |
4.0 -5.0 |
0.10 |
- |
0.25 |
0.10 |
- |
0.05 |
0.15 |
Remainder |
2)The mechanical properties of 5182-H111 wide aluminum sheet for fuel tanker
|
Alloy |
Temper |
Thickness (mm) |
Mechanical properties |
|||
|
Tensile Strength（Mpa） |
Yield strength （Mpa） |
Elongation (%) |
Minimum Bending Radius of 180 Degree |
|||
|
standard value |
standard value |
A50 |
|
|||
|
Not less than |
||||||
|
5182 |
O/H111 |
4-8mm |
280-350 |
≥125 |
≥26 |
1t |
Application of 5182-H111 wide aluminum sheet for fuel tanker
Mainly used for low-load parts that require high plasticity and good weldability, and work in liquid or gas media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: Wire is used to make rivets. Sheets can be used to process can lids, auto body panels, steering panels, reinforcements, brackets and other components.
