High recovery value of aluminum sheet for fuel tankBecause aluminum alloy has high corrosion resistance, after the can is forced to scrap, the aluminum alloy can body is not greatly damaged, and the recovery value of the can body is more than 85% of the original aluminum. In other words, if a tank uses 5T aluminum, it will cost at least 80,000 yuan to scrap the tank....
High recovery value of aluminum sheet for fuel tank
Because aluminum alloy has high corrosion resistance, after the can is forced to scrap, the aluminum alloy can body is not greatly damaged, and the recovery value of the can body is more than 85% of the original aluminum. In other words, if a tank uses 5T aluminum, it will cost at least 80,000 yuan to scrap the tank.
The aluminum alloy fuel tanker plate has a long product life and low maintenance cost
Aluminum alloy has the advantage of good corrosion resistance, which is more obvious in tanks that mainly transport effective and strong corrosive items. Therefore, the direct benefit to customers is that the service life of aluminum alloy tanks is greatly extended compared to steel tanks. According to the experience of Europe and North America, the life cycle of an aluminum alloy tank is generally 15-20 years, while the life of a steel tank is only 7-9 years.
At the same time, because the aluminum alloy has good corrosion resistance, the aluminum alloy tank body can maintain a bright and beautiful surface, and it does not require any coating or surface treatment, and the cleaning is very easy, so the maintenance cost of the aluminum alloy tank truck is quite small.
Good electrical conductivity and energy absorption performance of aluminum sheet for fuel tank
When the tanker collides, because the aluminum alloy has good electrical conductivity, little static electricity is collected on the tank body, so no sparks will be generated, and no accidents such as explosion will occur. At the same time, the aluminum alloy can well absorb the instantaneous energy generated by the tank body when it is pushed or rolled over, will not cause the tank body to crack, oil and other items leakage, and will not directly cause explosion and environmental pollution. In addition, since the weight of the tank body is greatly reduced, the center of gravity of the tanker is also reduced accordingly, thereby reducing the possibility of the tanker overturning and improving its drivability.
No special processing technology
As the third most abundant element in the earth's crust, aluminum has very abundant reserves (8.23%). Aluminum alloy is also the second most widely used metal besides steel, and its processing technology is already very mature. MIG, TIG, resistance welding, FSW and other welding methods can all be used to process aluminum sheet for fuel tank. At the same time, aluminum alloy can also be bent, stamped and deep-drawn.
From the perspective of environmental and social benefits, global environmental warming has become a hot spot for everyone, and the main reason is that the greenhouse gas CO2 emissions are relatively high. According to the research report of the European Aluminum Association, every use of the car 1KG of aluminum alloy can reduce CO2 emissions by 28KG.
In other words, if aluminum alloy tanks are used to reduce the weight by 5T, a total of 140T CO2 emissions can be reduced, the environment will be greatly improved, and the social benefits will be obvious. Therefore, aluminum alloy has incomparable advantages in terms of economic benefits, safety, environmental and social benefits.
